{"id":999998359,"date":"2023-08-14T19:07:21","date_gmt":"2023-08-14T19:07:21","guid":{"rendered":"https:\/\/alifsemi.com\/?page_id=999998359"},"modified":"2025-09-04T22:28:26","modified_gmt":"2025-09-04T22:28:26","slug":"ensemble-e7devkit","status":"publish","type":"page","link":"https:\/\/alifsemi.com\/support\/kits\/ensemble-e7devkit\/","title":{"rendered":"Ensemble E7 DevKit"},"content":{"rendered":"\r\n
\r\n
\r\n\r\n
\r\n \r\n
\r\n

\r\n Ensemble E7 DevKit <\/h2>\r\n <\/div>\r\n \r\n \r\n <\/div>\r\n \r\n \r\n
\r\n \r\n \r\n
\r\n \r\n <\/div>\r\n \r\n
\r\n
\r\n \r\n

\r\n Get started with the Ensemble E7 DevKit <\/h4>\r\n \r\n

\r\n The Ensemble E7 DevKit (DK-E7) is a cost-effective, single-board solution that brings out all signals on the device to easily access pins for power and performance profiling, prototyping, and more. The DevKit can be configured to operate as your choice of the E1, E3, E5, or E7 series MCU devices in the Ensemble family, with superset E7 series device having two Cortex-M55 CPU cores, two Ethos-U55 neural network processors cores, and two Cortex-A32 MPU cores. <\/p>\r\n \r\n \r\n \r\n \r\n

\r\n

\r\n Purchase <\/p>\r\n

\r\n\r\n \r\n Arrow \r\n \r\n \r\n \r\n <\/svg>\r\n <\/a>\r\n \r\n \r\n Mouser \r\n \r\n \r\n \r\n <\/svg>\r\n <\/a>\r\n \r\n <\/div>\r\n <\/div>\r\n \r\n \r\n \r\n <\/div>\r\n <\/div>\r\n\r\n \r\n <\/div>\r\n \r\n \r\n
\r\n \r\n
\r\n\r\n \r\n \r\n
\r\n\r\n

\r\n Alif Ensemble SDK GitHub <\/h2>\r\n \r\n
\r\n\r\n

\r\n This Alif Ensemble SDK GitHub page provides all the necessary instructions and tools to facilitate the development of applications on Ensemble processors including the Ensemble CMSIS DFP, Ensemble Azure RTOS CMSIS Pack, Ensemble VS Code template, and example and demo applications. <\/h4>\r\n \r\n
\r\n \r\n Access Online \r\n \r\n \r\n \r\n <\/svg>\r\n <\/a>\r\n\r\n \r\n <\/div>\r\n <\/div>\r\n \r\n <\/div>\r\n \r\n <\/div>\r\n
\r\n\r\n \r\n
\r\n\r\n

\r\n Ensemble DevKit User Guide <\/h2>\r\n \r\n \r\n
\r\n \r\n

\r\n (v1.3) This user guide shows how to configure and power up your Ensemble DevKit so you are ready to do application development. It also shows how to update the firmware in your Alif chip and shows optional UART connections to the development kit. <\/h4>\r\n \r\n
\r\n \r\n Download \r\n \r\n \r\n \r\n <\/svg>\r\n <\/a>\r\n\r\n \r\n <\/div>\r\n <\/div>\r\n \r\n <\/div>\r\n \r\n \r\n <\/div>\r\n
\r\n\r\n \r\n
\r\n\r\n

\r\n Alif Security Toolkit <\/h2>\r\n \r\n \r\n
\r\n \r\n

\r\n Quick Start Guide (v3.2) shows how to install the Alif Security Toolkit (SETOOLS) for Ensemble devices and shows some common commands used during application development.
\n\n
NOTE: Beginning with the V1.107.00 release, the default tools configuration for the target device is the Ensemble E8 device used on the Ensemble E8 DevKit. If you are using any other kit or your own board, you will need to select the correct target device. See Section 4 of the latest Alif Security Toolkit Quick Start Guide for details on different ways to do this.
\n\n
Alif Security Toolkit: (v1.107.00) for use with the Ensemble devices or evaluation kits. After downloading your Toolkit, be sure to update your board to the same version by running the updateSystemPackage utility.
<\/h4>\r\n \r\n
\r\n \r\n Quick Start Guide \r\n \r\n \r\n \r\n <\/svg>\r\n <\/a>\r\n\r\n \r\n Release Notes \r\n \r\n \r\n \r\n <\/svg>\r\n <\/a>\r\n \r\n Windows \r\n \r\n \r\n \r\n <\/svg>\r\n <\/a>\r\n \r\n Linux \r\n \r\n \r\n \r\n <\/svg>\r\n <\/a>\r\n \r\n MacOS \r\n \r\n \r\n \r\n <\/svg>\r\n <\/a>\r\n \r\n <\/div>\r\n <\/div>\r\n \r\n <\/div>\r\n \r\n \r\n <\/div>\r\n
\r\n\r\n \r\n
\r\n\r\n

\r\n Alif SE Host Services API Archive <\/h2>\r\n \r\n \r\n
\r\n \r\n

\r\n (v1.107.00) This archive contains source code for the Alif SE Host Services API software release.\n <\/h4>\r\n \r\n
\r\n \r\n Download \r\n \r\n \r\n \r\n <\/svg>\r\n <\/a>\r\n\r\n \r\n <\/div>\r\n <\/div>\r\n \r\n <\/div>\r\n \r\n \r\n <\/div>\r\n
\r\n\r\n \r\n \r\n
\r\n\r\n

\r\n Ensemble VS Code Project Template <\/h2>\r\n \r\n
\r\n\r\n

\r\n This VS Code project template is for use with Ensemble devices. NOTE: After cloning this template file to a project folder, open up a terminal window in that folder and execute the command \u201cgit submodule update -\u2013init\u201d. This will load the board library sub-module. <\/h4>\r\n \r\n
\r\n \r\n Access Online \r\n \r\n \r\n \r\n <\/svg>\r\n <\/a>\r\n\r\n \r\n <\/div>\r\n <\/div>\r\n \r\n <\/div>\r\n \r\n <\/div>\r\n
\r\n\r\n \r\n
\r\n\r\n

\r\n Getting Started with Linux Pre-Built Images <\/h2>\r\n \r\n \r\n
\r\n \r\n

\r\n (v0.5.2_3) This User Guide shows how to use pre-built images to program a demo distribution of Linux into the on-chip MRAM or into the off-chip OSPI flash memory on the Ensemble DevKit (DK-E7). This release includes HyperRAM support for user programs. <\/h4>\r\n \r\n
\r\n \r\n Download \r\n \r\n \r\n \r\n <\/svg>\r\n <\/a>\r\n\r\n \r\n <\/div>\r\n <\/div>\r\n \r\n <\/div>\r\n \r\n \r\n <\/div>\r\n
\r\n\r\n \r\n
\r\n\r\n

\r\n Linux Pre-Built Images Archive <\/h2>\r\n \r\n \r\n
\r\n \r\n

\r\n (v0.5.2) This archive contains the pre-built images to load beta distribution v0.5.2 on the Ensemble DevKit (DK-E7). <\/h4>\r\n \r\n
\r\n \r\n Download \r\n \r\n \r\n \r\n <\/svg>\r\n <\/a>\r\n\r\n \r\n <\/div>\r\n <\/div>\r\n \r\n <\/div>\r\n \r\n \r\n <\/div>\r\n
\r\n\r\n \r\n
\r\n\r\n

\r\n Production Silicon GPIO Pin Mux Options <\/h2>\r\n \r\n \r\n
\r\n \r\n

\r\n (v1.3) This document describes the GPIO pin mux options and output grouping. <\/h4>\r\n \r\n
\r\n \r\n Download \r\n \r\n \r\n \r\n <\/svg>\r\n <\/a>\r\n\r\n \r\n <\/div>\r\n <\/div>\r\n \r\n <\/div>\r\n \r\n \r\n <\/div>\r\n
\r\n\r\n \r\n
\r\n\r\n

\r\n Ensemble DevKit Schematics <\/h2>\r\n \r\n \r\n
\r\n \r\n

\r\n This document contains the schematics for the DK-E7. <\/h4>\r\n \r\n
\r\n \r\n Download \r\n \r\n \r\n \r\n <\/svg>\r\n <\/a>\r\n\r\n \r\n <\/div>\r\n <\/div>\r\n \r\n <\/div>\r\n \r\n \r\n <\/div>\r\n
\r\n\r\n \r\n
\r\n\r\n

\r\n Camera Module Adapter Board Schematics <\/h2>\r\n \r\n \r\n
\r\n \r\n

\r\n This is a reference design of an adapter board from the IAS camera module connector on the Alif AppKit and DevKit, to the HM0360 & 15-pin Arducam connectors used on Raspberry Pi boards. <\/h4>\r\n \r\n
\r\n \r\n Download \r\n \r\n \r\n \r\n <\/svg>\r\n <\/a>\r\n\r\n \r\n <\/div>\r\n <\/div>\r\n \r\n <\/div>\r\n \r\n \r\n <\/div>\r\n
\r\n\r\n \r\n
\r\n\r\n

\r\n Ensemble DevKit Bill of Materials <\/h2>\r\n \r\n \r\n
\r\n \r\n

\r\n This document is the bill of materials for the DK-E7. <\/h4>\r\n \r\n
\r\n \r\n Download \r\n \r\n \r\n \r\n <\/svg>\r\n <\/a>\r\n\r\n \r\n <\/div>\r\n <\/div>\r\n \r\n <\/div>\r\n \r\n \r\n <\/div>\r\n
\r\n\r\n \r\n
\r\n\r\n

\r\n Ensemble DevKit Altium Project Files <\/h2>\r\n \r\n \r\n
\r\n \r\n

\r\n This is a set of Altium project files for the PCB used in the DK-E7. <\/h4>\r\n \r\n
\r\n \r\n Download \r\n \r\n \r\n \r\n <\/svg>\r\n <\/a>\r\n\r\n \r\n <\/div>\r\n <\/div>\r\n \r\n <\/div>\r\n \r\n \r\n <\/div>\r\n
\r\n\r\n \r\n
\r\n\r\n

\r\n E7 Hardware Reference Manual <\/h2>\r\n \r\n \r\n
\r\n \r\n

\r\n (v2.9) Fusion Processor with quad cores up to 160MHz, 400MHz, and 800MHz operation capable of running combinations of Linux and\/or RTOS, large memory, secure enclave, many peripherals, and AI\/ML NPUs accelerators up to 250 GOPS performance. <\/h4>\r\n \r\n
\r\n \r\n Download \r\n \r\n \r\n \r\n <\/svg>\r\n <\/a>\r\n\r\n \r\n <\/div>\r\n <\/div>\r\n \r\n <\/div>\r\n \r\n \r\n <\/div>\r\n
\r\n\r\n \r\n
\r\n\r\n

\r\n E7 Datasheet <\/h2>\r\n \r\n \r\n
\r\n \r\n

\r\n (v2.12) Fusion Processor with quad cores up to 160MHz, 400MHz, and 800MHz operation capable of running combinations of Linux and\/or RTOS, large memory, secure enclave, many peripherals, and AI\/ML NPUs accelerators up to 250 GOPS performance. <\/h4>\r\n \r\n
\r\n \r\n Download \r\n \r\n \r\n \r\n <\/svg>\r\n <\/a>\r\n\r\n \r\n <\/div>\r\n <\/div>\r\n \r\n <\/div>\r\n \r\n \r\n <\/div>\r\n
\r\n\r\n \r\n
\r\n\r\n

\r\n Ensemble Software Reference Manual <\/h2>\r\n \r\n \r\n
\r\n \r\n

\r\n (v1.8) Software Reference manual for the entire family of Ensemble scalable and compatible MCUs and fusion processors.\n <\/h4>\r\n \r\n
\r\n \r\n Download \r\n \r\n \r\n \r\n <\/svg>\r\n <\/a>\r\n\r\n \r\n \r\n Access Online \r\n \r\n \r\n \r\n <\/svg>\r\n <\/a>\r\n \r\n <\/div>\r\n <\/div>\r\n \r\n <\/div>\r\n \r\n \r\n <\/div>\r\n \r\n <\/div>\r\n \r\n \r\n \r\n
\r\n
\r\n \r\n Return to Support\r\n <\/a>\r\n <\/div>\r\n <\/div>\r\n \r\n <\/div>\r\n<\/div>\r\n\r\n","protected":false},"excerpt":{"rendered":"","protected":false},"author":1,"featured_media":0,"parent":6299,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_acf_changed":false,"content-type":"","inline_featured_image":false,"footnotes":""},"class_list":["post-999998359","page","type-page","status-publish","hentry"],"acf":[],"_links":{"self":[{"href":"https:\/\/alifsemi.com\/wp-json\/wp\/v2\/pages\/999998359","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/alifsemi.com\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/alifsemi.com\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/alifsemi.com\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/alifsemi.com\/wp-json\/wp\/v2\/comments?post=999998359"}],"version-history":[{"count":88,"href":"https:\/\/alifsemi.com\/wp-json\/wp\/v2\/pages\/999998359\/revisions"}],"predecessor-version":[{"id":1000002523,"href":"https:\/\/alifsemi.com\/wp-json\/wp\/v2\/pages\/999998359\/revisions\/1000002523"}],"up":[{"embeddable":true,"href":"https:\/\/alifsemi.com\/wp-json\/wp\/v2\/pages\/6299"}],"wp:attachment":[{"href":"https:\/\/alifsemi.com\/wp-json\/wp\/v2\/media?parent=999998359"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}